Brother P-touch E550W User Manual page 55

TROUBLESHOOTING
Message
Select Other Cut
Option!
Close Cover!
Installed tape is
not compatible
with this machine!
Line Limit! Max
297 Lines per
Label
Block Function is
not Allowed!
Line Limit! Max 3
Lines
This Function
Requires 9mm or
Wider Tape!
Sequence Type
Must be None
When Editing!
No Database
Found!
No Data!
Bar Code Error!
Memory Full!
Reduce File Size
to Proceed
Hi-Res Print Not
Supported with
This Media!
54
Error Messages
The tape length set using the tape length setting is shorter than the
total length of the left and right margins applied for the "Large Margin"
cutting option. You must select a different cutting option.
The rear cover is open. Close the cover when printing.
Tape that is incompatible with the P-touch has been installed. Use a
compatible tape.
Exceeds max. You can enter up to 297 lines in the whole page and
blocks.
In this setting, you cannot add or delete blocks.
PUNCH-DOWN BLOCK layout allows to print up to 3 lines/block.
PUNCH-DOWN BLOCK layout must use 9mm or wider tape
cassettes.
Text cannot be edited when you set Sequence Type in PUNCH-
DOWN BLOCK to Horizontal or Backbone.
The Database key on the P-touch was pressed while there is no
database file saved in the P-touch.
You tried to open a database file which doesn't contain any data.
Bar code labels were attempted to print from a database.
The P-touch will display this message when the selected range of the
database includes invalid characters/numbers not supported by the
bar code protocol.
The total data size exceeds the built-in flash memory after editing
database records.
Cannot print labels in high resolution mode when non-supported
media (fabric tape, heat shrink tube etc.) is installed in the P-touch.
Cause/Remedy