Table of Contents
Advertisement
Operations
Control panel
1
Course Selector
2
Display area
3
Temp.
4
Rinse
5
Spin
6
Options
7
Prefer Mode
Navigation
8
buttons
9
Start/Pause
10 Power
Untitled-7 24
1
2
Turn the dial to select a course.
Displays information of the current course including the course name,
remaining washing time, and settings.
Press to change the water temperature for the current course.
Press and hold for 3 seconds to turn on/off the Drum Light.
Press to change the rinse times for the current course.
You can set the rinse times up to 5.
Press to change the spinning speed for the current course.
•
Rinse Hold: The final rinse cycle is suspended so that the laundry
remains in the water. To unload the laundry, run a drain or spin
cycle.
•
No Spin: The drum does not spin after the final drain cycle.
Press to enter the Options screen.
Press to enter custom options screen. 3 custom options are available
but multiple selection is not allowed.
Press and hold for 3 seconds to enter the Settings screen.
Use to navigate through the menus or to adjust the value of the
settings: Temp., Rinse, and Spin.
Press to start or stop an operation.
Press to turn on/off the washing machine.
English - 24
3
4
5
6
7
8
9
10
2015-07-15
11:17:22
Advertisement
Table of Contents
