13
SERVICE WORK ON THE CHASSIS
13.12
Checking/rectifying the fluid level of the hydraulic clutch
Info
The fluid level rises with increasing wear of the clutch lining disc.
Do not use brake fluid.
Guideline
Screw, chain guide
Finishing work
(Option: Center stand)
–
Remove the vehicle from the center stand. (
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
–
Check the fluid level.
Fluid level below top edge of container
»
If the coolant level does not meet specifications:
–
Correct the fluid level of the hydraulic clutch.
S00270-10
Hydraulic fluid (15) (
–
Position the cover with the membrane. Mount and tighten the screws.
M6
.
1
with membrane
.
2
3
p. 207)
5 Nm
Loctite
(3.7 lbf ft)
p. 98)
4 mm (0.16 in)
109
®
243™