Canon MX470 series Online Manual page 360

Hide thumbs Also See for MX470 series:

Table of Contents

• Only Auto is available when Select Source is Auto.

• Only 300 dpi or 400 dpi can be set when Start OCR is selected in Application Settings.

Document Scan Orientation Settings...

This appears when you select ADF or Auto for Select Source.

Click to display the Document Scan Orientation Settings dialog in which you can set the orientation

and binding side of the documents to be scanned from the ADF.

• Binding Side cannot be specified when scanning only the front side of each document.

Compress scanned images upon transfer

Compresses scanned images when transferring them to a computer. This is useful when your

scanner or printer and computer are connected with a slow interface such as USB1.1 or a network.

• This does not appear when Select Source is Auto.

Image Processing Settings

(Right Arrow) to set the following. Available setting items vary by Select Source.

• When Select Source is Auto:

Apply recommended image correction

Applies suitable corrections automatically based on the item type.

• The color tone may differ from the source image due to corrections. In that case,

deselect the checkbox and scan.

• Scanning takes longer than usual when you enable this function.

• When Select Source is Photo:

• When Color Mode is Black and White, Image Processing Settings is not available.

Sharpen outline

Emphasizes the outline of the subjects to sharpen the image.