Inserting The Battery Pack And Memory Card - Canon PowerShot SX540 HS Getting Started

Hide thumbs Also See for PowerShot SX540 HS:
Table of Contents

Advertisement

Initial Preparations

Inserting the Battery Pack and Memory Card

(2)
(1)
4
1
Open the cover.
z
z
Slide the cover (1) and open it (2).
(1)
2
Insert the battery pack.
z
z
Holding the battery pack with the
terminals (1) facing as shown, press the
battery lock (2) in the direction of the
arrow and insert the battery pack until the
lock clicks shut.
z
z
If you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always confirm that the
(2)
battery pack is facing the right way and
locks when inserted.
z
z
To remove the battery pack, press the
battery lock in the direction of the arrow.
3
Check the card's write-protect
tab and insert the memory card.
z
z
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position.
z
z
Insert the memory card with the label (1)
facing as shown until it clicks into place.
z
z
To remove the memory card, push it in
(1)
until you feel a click, and then slowly
release it.

Advertisement

Table of Contents
loading

Table of Contents