Samsung SCC-B5366 User Manual page 9

No Name
1 Cover dome
2 Inner cover
3 Wing locker
4 Main body
5 Mount bracket
6 Wiring Passage
7 Zoom lever
8 Focus lever
9 Tilt fi xing screw
10 4-way Switch
11 Groove mark
12 Locker
13 Lock releaser
14 Cable
Covers the inner cover, lens, and main body to protect them.
Covers the main body to protect it.
Push a long thin screwdriver into its narrow spot and press it outward when you want to
remove the inner cover.
Includes a lens, a switch board, a PCB board, screws, and such.
Used as a ceiling or wall fi xture. It is fi xed using three long tab screws provided in the
package.
This passage is designed to make arrangement of the cables if you drill a hole to extend the wiring.
Using this lever, the lens zoom can be adjusted and fi xed.
The lens focus can be adjusted by rotating it left or right. Rotate it clockwise for fi xing.
Using this screw, the slope of the lens can be adjusted and fi xed.
This switch is used to set and adjust the settings of the camera's functions.
To attach the Main body to the Mount bracket, align this groove mark on the Main body with
the wide groove in the CAMERA FRONT side on the Mount bracket.
Used to open or close the Cover dome. To open the cover dome, press the locker.
Push it outward and rotate the main body in UNLOCK direction when you want to remove
the Mount bracket from the Main body or to remove the installed camera from the Mount
bracket.
Connect the Video connector to BNC cable and Power connector to power adapter.
Introduction
Brief description
English 9
–