Settings For Web Service - Canon MX920 series Online Manual

Hide thumbs Also See for MX920 series:
Table of Contents

Advertisement

Settings for Web Service

This section describes the machine's settings for web service.
Registering the Account on Photo Sharing Site
Resetting the Web Service Settings
Before using the web service, see the terms of service.
Notice for Web Service Printing
Registering the Account on Photo Sharing Site
Register the account on the photo sharing site to the machine following the procedure below.
Important
LAN connection with the machine and internet connection are required to use this function.
Before you register the account to the machine, you have to get the account on the photo sharing
site. For getting the account, refer to the photo sharing site.
You can register the login name or e-mail address up to 256 characters and register the password up
to 80 characters. When you get the account on the photo sharing site, set the login name or e-mail
address within 256 characters and set the password within 80 characters.
Set the login name, e-mail address, and password in letters and figures can be entered on the LCD of
the machine.
1.
Make sure that the machine is turned on.
Confirming that the Power Is On
2.
Press the MENU button.
The menu screen is displayed.
3.
Select
Web service, then press the OK button.
4.
Select
Web service setup, then press the OK button.
5.
Use the
button to select Online Album connection setup, then press the OK button.
6.
Use the
button to select Register account, then press the OK button.
Note
When you delete the account, select Delete account, then press the OK button. After selecting
the photo sharing site to delete the account and pressing the OK button, the confirmation screen
to delete the account is displayed. To delete the account, select Yes and press the OK button.
7.
Use the
button to select the photo sharing site to register the account, then press the OK button.
The message for account information is displayed.
8.
Check the message, then press the OK button.
9.
When the confirmation screen for account management is displayed, press the left Function button.
Note
By pressing the OK button, you can display the message for account management policy.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx520 series

Table of Contents