I-05] Configuring The Protocol Settings - Canon LBP7210Cdn Manual

[I-05] Configuring the Protocol Settings

You can configure the protocol settings using the following software.
Web browser (Remote UI)
You can specify the settings by accessing the printer from your web browser via the network.
FTP Client
You can specify the settings by accessing the FTP server of the printer using Command Prompt.
NetSpot Device Installer
You can configure the basic protocol settings using the Canon software, NetSpot Device Installer, in the
supplied CD-ROM.
If you want to configure the settings such as the DNS server settings, use the Remote UI or FTP Client.
This section describes the procedure for specifying the settings using a web browser (Remote UI).
NOTE
Specifying the settings using FTP Client
"FTP Client"
Specifying the settings using NetSpot Device Installer
"NetSpot Device Installer"
Display the Printer Status Window.
Click [ ] in the Windows task tray, and then select the printer name.
NOTE
When displaying the Printer Status Window from the printer driver
Click [
Select [Remote UI] from the [Options] menu.
] (Display Printer Status Window) in locations such as in the [Page Setup] sheet.