Using The Lcd Monitor - Canon PowerShot A100 User Manual

Using the LCD Monitor

Use the LCD monitor for shooting images, whilst
checking images, for menu operations and re-
playing images.
The image in the LCD monitor may darken
when the monitor is used under sunlight or
other strong lighting. This is not a defect.
Shooting Mode
The display changes as shown in the following
diagram when the DISP button is pressed.
LCD monitor display (no information view)
LCD monitor display (information view)
No LCD monitor display
• The On / Off setting of the LCD monitor dis-
play mode is memorized when the camera is
turned off. When the camera is turned on
again it assumes the last mode. However,
when the LCD monitor is turned on and the
"Change the Batteries" message appears, the
LCD monitor may not automatically turn on
the next time the camera is started.
• When the LCD monitor is set to On (no
information display) or Off, shooting informa-
tion appears for approximately 6 seconds
when you take any of the following actions.
- The power is turned on.
- The SET, DISP,
or / button is pressed.
- The camera settings are changed.
- The Set up menu is closed.
- When the shutter button is pressed and
shooting is finished (only when LCD
monitor is on).
• Setting the Shooting mode to
turns the LCD monitor on regardless of
whether it is set to On or Off.
G Basic Functions G
/ / , ,
, or
/
29