Timer Recording - Samsung DVD-R120 Instruction Manual

Video
The disc revolves, but no image or bad quality
images are displayed.
Be sure that the Video Setting is
Checkpoint 1
properly set. (See pages 35 ~ 37)
Check whether there is damage to or
Checkpoint 2
any foreign material on your disc.
Some low quality discs may not play
Checkpoint 3
properly.
If scenes change from dark to bright
Checkpoint 4
suddenly, the screen may shake
vertically temporarily, but this is not a
fault.
Sound
No sound.
Are you watching a programme in slow
Checkpoint 1
or skip mode?
If you are playing a programme at a
speed other than normal speed, sound
will not be heard.
Check the connections and settings.
Checkpoint 2
(See pages 21~22, 34)
Check whether the disc is damaged.
Checkpoint 3
Clean the disc, if necessary.
Checkpoint 4 Check whether the disc is inserted
correctly with the label facing up.
No audio output.
Check whether you have selected the
Checkpoint 1
correct digital output options in the
Audio Output Options menu.
(See page 34.)
90
- English

Timer Recording

Timer lamp flickers.
Check there is enough space in the
Checkpoint 1
disc for recording.
Check whether the current disc is
Checkpoint 2
recordable or not.
Make sure to check before the start
time of recording.
Timer recording does not work properly.
Re-check the recording time and the
Checkpoint 1
end time settings again.
Recording will be cancelled if the power
Checkpoint 2
is interrupted due to a power failure or
another similar reason while recording.