Inner Cabinet (Rear) Assembly Replacing Method - Sony DSC-P1 Service Manual And Parts List

2-8. INNER CABINET (REAR) ASSEMBLY REPLACING METHOD

1 Peel off the light interception sheet (F).
2 From the aluminum cabinet (rear) assembly, remove
the inner cabinet (rear) assembly stuck with
adhesive sheet (A) at two places.
3 Pull off the forcibly fitted parallel pin (dia. 1.6 × 5)
in the direction of arrow A.
4 Pull the jack cover off the inner cabinet (rear).
Downloaded from www.Manualslib.com
Adhesive sheet (A)
[Between inner cabinet (rear) assembly
and aluminum cabinet (rear) assembly]
Light interception sheet (F)
Parallel pin (dia. 1.6 × 5)
A
Inner cabinet (rear) assembly
Jack cover
manuals search engine
5 Insert the jack cover into new inner
cabinet (rear) assembly.
Inner cabinet (rear) assembly
Jack cover
6 Forcibly fit the Parallel pin (dia. 1.6 × 5).
Parallel pin (dia. 1.6 × 5)
7 Check if adhesive sheet (A) remains on the aluminum
cabinet side, and if so, remove it. Peel stripping sheet off
the adhesive sheet (A) at two places in the inner cabinet (rear)
assembly. Insert the inner cabinet (rear) assembly,
aligning with the aluminum cabinet.
Aluminum cabinet (rear)
assembly
8 As shown below, affix the light
interception sheet (F), aligning with
the positioning boss.
Light interception sheet (F)
2-7
adhesive sheet (A)