Omega Engineering 8 Channel Thermocouple USB Data Acquisition Module TC-08 User Manual page 32

28 TC-08 User's Guide
Reserved error codes
Error Error
code
7 USBTC08_ERROR_NOT_RESPONDING
8 USBTC08_ERROR_FW_FAIL
9 USBTC08_ERROR_CONFIG_FAIL
10 USBTC08_ERROR_NOT_FOUND
11 USBTC08_ERROR_THREAD_FAIL
12 USBTC08_ERROR_PIPE_INFO_FAIL
13 USBTC08_ERROR_NOT_CALIBRATED
14 USBTC08_ERROR_PICOPP_TOO_OLD
Note: These reserved error code values are meaningful only to our technical support
staff, but they are supplied to allow developers to display warnings in their
applications. For more details on error codes, see troubleshooting.
handle
Arguments
-1
Returns
Error
code
Specifies the USB TC-08 unit.
Invalid handle.
See the error code information above for further
explanation.
Further information
Cannot get a reply back from a USB
TC-08 unit.
Unable to download firmware.
Missing or corrupted EEPROM.
Cannot find enumerated device.
A threading function failed.
Can not get USB pipe information.
No calibration date was found.
An old picopp.sys driver was found
on the system.