Table of Contents
Advertisement
If your model has -3M option, add the parameter p3.
p3:
2.20 Waveform Display and Scale Display Setting (DISP_WAVE, for the VR 200
with style number 2 or higher)
(see section 4.7.3 in the instruction manual)
Format: MDp1, p2, p3
Example: MD02, ON, ON
Select the methods when saving measurement data to the floppy disk:
ALL (default) save all measurement data from the VR200 internal memory.
UNSAVED: Save only the meansurement data newly loaded to the VR200
internal memory, after the last time you saved to the floppy disk.
p1:
Channel number (CC)
p2:
Turn ON/OFF the waveform display
p3:
Turn ON/OFF the scale display
2.2 Program Set Commands
2 - 9
Advertisement
Table of Contents
