Samsung SNC-B5395 User Manual page 14

3 Switch 3 (h-REV) : When this switch is set to ON, the camera image is reversed
horizontally. If you want to monitor your site using a mirror, you can use this feature to see
the right image.
4 Switch 4 (V-REV) : When this switch is set to ON, the camera image is reversed
vertically. If your camera reluctantly displays the vertically reversed image, you can use
this feature to see the right image.
5 Switch 5 (BlC) : When this switch is set to ON, you can view a clear image even though
the camera faces any excessive light such as sunlight and fluorescent light. When it is set
to OFF, the subject with excessive light is not clearly shown.
6 Switch 6 (Fl) : When this switch is set to ON, the shutter speed is fixed to 1/100 sec
(for NTSC) or 1/120 sec (for PAL) to prevent screen from flickering by the disaccordance
between vertical synchronous frequency (50Hz for NTSC, 60Hz for PAL) and on-and-off
frequency of a light.
7 Switch 7 (d/N) : When this switch is set to ON, the camera automatically switches
between color and B&W according to the brightness of the vicinity.
8 Switch 8 (AWB) : This switch adjusts white balancing. When this switch is set to ON, this
camera operates in ATW mode, and in case of OFF, this camera operates in AWC mode.
ATW (Auto Tracking White Balance):
The color temperature is automatically adjusted according to the environmental change.
(Approx. 2000°K to 11,000°K)
AWC (Auto White Balance Control):
It stores the color temperature just when the switch is changed to OFF. Accordingly color temperatures
are adjusted by the stored value.
10_
Installation and Connection