Wiper Control - CITROËN C-ZERO Handbook

Visibility

Wiper control

The wipers are controlled directly by the driver
by means of the stalk A and its ring B.
In wintry conditions, remove snow, ice
or frost present on the windscreen,
around the wiper arms and blades and
the windscreen seal, before operating
the wipers.
Do not operate the wipers on a dry
windscreen. Under extremely hot or
cold conditions, ensure that the wiper
blades are not stuck to the windscreen
before operating the wipers.
54
Windscreen wipers
A. Wiping speed selection stalk: raise or lower
the stalk to the desired position.
Single wipe.
Park.
Intermittent (the speed can be set
manually).
Slow.
Fast.
B. Intermittent operation adjustment ring.
F Turn this ring to increase or reduce the
wiping frequency in intermittent mode.
Windscreen wash
Pull the wiper stalk towards you.
The windscreen wash, then the windscreen
wipers, operate for a pre-determined time.
Rear wiper
C. Rear wiper selection ring.
Park.
Intermittent wipe.
The wiper wipes twice then switches to
intermittent mode with an interval of a few
seconds.
Wipe with screenwash.
Keep the ring in this position to operate the
screenwash with several wipes of the wiper.