CITROËN C-ZERO Handbook page 102

Practical information
2. Inflation
F Check that the compressor switch A is in
the "OFF" position.
F Uncoil the compressor pipe B.
100
F Connect this pipe to the valve of the
repaired wheel.
F Connect the compressor's electric plug to
the vehicle's 12 V socket (ignition switch in
position "ON" or "ACC").
F Start the compressor by turning the switch A
to the "ON" position.
F Using the compressor, adjust the pressure
in accordance with the vehicle's tyre
pressure label (located in the driver's door
aperture).
A loss of pressure indicates that the
puncture has not been fully plugged;
contact a CITROËN dealer or a qualified
workshop for assistance.
F Remove the compressor and stow the kit.
F Drive off straight away at reduced
speed (50 mph [80 km/h] max) limiting
the distance travelled to approximately
120 miles (200 km).
If after around 5 to 7 minutes the
pressure is not attained, this indicates
that the tyre is not repairable; contact
a CITROËN dealer or a qualified
workshop for assistance.
As soon as possible, go to a CITROËN
dealer or a qualified workshop.
Tell the technician that you have used
the kit. After checking, the technician
will advise you whether the tyre can be
repaired or must be replaced.