PV-GS180P / PV-GS180PC
10 SERVICE MODE
10.1. ERROR DISPLAY
"PUSH THE RESET SWITCH" is displayed automatically on the EVF or the LCD Monitor when an undesirable condition has
occured.
10.2. Service Menu
When abnormal detection contents are confirmed a When I do the following operation automatic diagnosis cord is
displayed.
1. Preparation
Remove the card and tape from this machine.
2. Service menu is dieplayed. (seeFig. S1)
Pushed [QUICK START] button and [JOYSTICK LEFT
3. Operating automatic diagnosis cord is displayed.
Item [3] is selected with the [JOYSTICK UP or DOWN
[NO] is selected with the [JOYSTICK RIGHT
[YES] is selected with the [JOYSTICK UP or DOWN
Press the [CURSOR CENTER] button.
] button and [PHOTO SHOT] button simmultaneously for 3 seconds.
] button.
] button.
] button.
Fig. S1
36