Changing The Water Filter - Samsung RF4287HA User Manual

USING THE CONTROL PANEL
If you do not press any button, the freezer and fridge
temperature indicator turn off in a few seconds.
If you press any button, the display lights up again.
Water fi lter usage
( 10 ) Filter ( 10 ) Filter
1. Normally the fi lter indicator is blue,
yellow, or green when you purchase or
install your refrigerator, depending on
your model.
2. After you use about 270 gallons of water,
the fi lter indicator turns Light Pink. (about
5 months)
3. After you use about 300 gallons of water,
the fi lter indicator turns Red. (about 6
months)
(Blue) (Blue) (Red) (Red)
4. Remove the old water fi lter and install
(Reset the indicator) (Reset the indicator)
a new one when the fi lter indicator is
red. Reset the fi lter indicator by pressing
Alam/Hold 3 sec for Filter Reset button
for 3sec. The fi lter indicator turns blue,
yellow, or green when you reset the
indicator.
• If water is not dispensing or dispensing
slowly, you need to replace the water
filter because the water filter is clogged.
• Some areas have large amounts of lime
in their water, which causes the water
filter to clog more quickly.

CHANGING THE WATER FILTER

To reduce risk of water damage to your
property DO NOT use generic brands of
WARNING
water fi lters in your SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND WATER
FILTER. SAMSUNG will not be legally
responsible for any damage, including, but
not limited to property damage caused by
water leakage from use of a generic water
fi lter. SAMSUNG Refrigerators are designed
to work ONLY WITH SAMSUNG Water Filter.
The Filter light turns red to let you know when it is time
to change your water fi lter cartridge.
To give you time to get a new fi lter, the red light comes
on just before the capacity of the current fi lter runs
out.
Changing the fi lter on time provides you with the
freshest, cleanest water from your refrigerator.
14_ operating
DA68-01922B-14.indb 14 DA68-01922B-14.indb 14
1. Shut off the water supply. Then, turn the
water filter ( 1 ) about 1/4 turn, counter-
clockwise.
2. Pull the water filter ( 1 ) from the case filter
( 2 ).
• To change the water filter more easily, shut
off the water supply valve.
• Sometimes, it is hard to disassemble the water
filter because impurities in the water cause it to
stick. If you are having difficulties, grip the water
filter firmly and pull it hard.
• When you pull the water filter, a little water can
leak from the opening. This is normal. To minimize
the water leaks, keep the filter cartridge horizontal
when you pull it.
• To prevent overflow, empty the water tray filter ( 3 )
and dry around of case filter ( 2 ).
3. Insert the new filter into
the filter case ( 4 )
4. Push the filter, and then
turn it clockwise until it
locks.
• If you are in trouble of inserting the water
filter as high pressure of water, shut off the
water supply valve.
• The locked symbol should be lined up with the
indicator line.
5. press the "Alarm/hold 3 sec for
Filter Reset" button (
(Filter Reset) (Filter Reset)
for about 3 seconds to reset the
water filter. The color of indicator
( ) changes from red to blue,
green, or yellow.
(Red) (Red)
2
1
2
3
4
)
2013. 12. 10. 2013. 12. 10. 6:22 6:22