Panasonic SC-HC27 Operating Instructions

Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.
Panasonic Corporation
Web Site: http://panasonic.net
© Panasonic Corporation 2012
Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.
Your system and the illustrations can look differently.
Safety precautions
WARNING!
Unit
• To reduce the risk of fire, electric shock or product
damage,
– Do not expose this unit to rain, moisture, dripping or
splashing.
– Do not place objects filled with liquids, such as vases,
on this unit.
Bottom of product – Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
Battery
• Risk of fire, explosion and burns. Do not recharge,
disassemble, heat above 60°C or incinerate.
Inside of product • Keep the button-type battery out of the reach of children.
Never put button-type battery in mouth. If swallowed call
your doctor.
Product Identification Marking is located on the bottom
of the unit.
Supplied accessories
Check and identify the supplied accessories.
1 x AC mains lead
Operating Instructions
Compact Stereo System
1 x FM indoor antenna
SC-HC27
Model No.
1 x AM loop antenna
1 x Remote control
(with a battery)
(N2QAYC000059)
GN
En
RQT9577-1L
L0212HH1052
Specifications
Amplifier section
RMS output power stereo mode
Front Ch (both ch driven)
5 W per channel (6 ), 1 kHz, 10% THD
CAUTION!
Total RMS stereo mode power
Unit
• To reduce the risk of fire, electric shock or product
damage,
– Do not install or place this unit in a bookcase, built-in Tuner section
cabinet or in another confined space. Ensure this unit is
well ventilated.
Preset station
– Do not obstruct this unit's ventilation openings with
newspapers, tablecloths, curtains, and similar items.
Frequency modulation (FM)
– Do not place sources of naked flames, such as lighted
Frequency range
candles, on this unit.
87.50 MHz to 108.00 MHz (50 kHz step)
• This unit is intended for use in moderate climates.
• Install this unit so that the AC mains lead can be Antenna terminals
unplugged from the socket outlet immediately if any
Amplitude modulation (AM)
problem occurs.
Frequency range 522 kHz to 1629 kHz (9 kHz step)
• This unit may receive radio interference caused by mobile
520 kHz to 1630 kHz (10 kHz step)
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile
telephone.
• This unit utilizes a laser. Use of controls or adjustments
Terminals section
or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
USB port
USB standard
Battery
Media file format support
• Danger of explosion if battery is incorrectly replaced.
USB device file system
Replace only with the type recommended by the
manufacturer. USB port power DC OUT 5 V, 500 mA MAX
• When disposing the batteries, please contact your local
iPod connector DC OUT 5 V, 1.0 A MAX
authorities or dealer and ask for the correct method of
Headphones jack
disposal.
Terminal
• Do not heat or expose to flame.
• Do not leave the battery(ies) in a car exposed to direct
sunlight for a long period of time with doors and windows
closed.
Maintenance
To clean this system, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this
system.
• Before using chemically treated cloth, read the instructions
that came with the cloth carefully.
"Made for iPod" and "Made for iPhone" mean that an
electronic accessory has been designed to connect
specifically to iPod, or iPhone, respectively, and has been
certified by the developer to meet Apple performance
standards.
Apple is not responsible for the operation of this device or
its compliance with safety and regulatory standards.
– If you see this symbol –
Please note that the use of this accessory with iPod, or
Information on Disposal in other Countries outside
iPhone may affect wireless performance.
the European Union
iPhone, iPod, iPod classic, iPod nano, and iPod touch are
This symbol is only valid in the
trademarks of Apple Inc., registered in the U.S. and other
European Union.
countries.
If you wish to discard this product,
please contact your local authorities or
dealer and ask for the correct method
of disposal.
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
Disc section General
Disc played (8 cm or 12 cm) Power supply
CD, CD-R/RW (CD-DA, MP3 ) Power consumption
Pick up Dimensions (W x H x D)
10 W Wavelength 790 nm (CD)
Laser power CLASS 1
Audio output (Disc) Mass
Number of channels 2 ch (FL, FR) Operating temperature range
FL = Front left channel Operating humidity range
FR = Front right channel
FM 30 stations
AM 15 stations MPEG-1 Layer 3, MPEG-2 Layer 3
Power consumption in standby mode
Speaker section
Note:
75 (unbalanced)
• Specifications are subject to change without notice.
Type 1 way, 1 speaker system (bass reflex) Mass and dimensions are approximate.
• Total harmonic distortion is measured by the digital
Speaker unit(s)
spectrum analyzer.
Full range 8 cm cone type x 1/ch
Impedance 6
USB 2.0 full speed
MP3 (*.mp3)
FAT12, FAT16, FAT32
Stereo, 3.5 mm jack
Overview of controls
Front view
SLEEP DIMMER
RADIO/
iPod CD
USB
SETUP MUTE
iPod MENU SOUND PLAY MENU
DISPLAY
OK
ALBUM
A Standby/on switch [`], [1]
• Press to switch the unit from on to standby mode or
Top view
B Select audio source
M N
C Basic playback control
D View the clock and timer options
E View the iPod menu
View information
F Select the sound effects
G Select the option
A B C J O Skip album
Getting started
AC 220 to 240 V, 50 Hz
19 W
400 mm x 213 mm x 110 mm
[D = 72 mm (min)]
[D = 144 mm (tray open)]
g
2 k
0°C to +40°C
35% to 80% RH (no condensation)
1 Connect the FM indoor antenna. 3 Connect the AC mains lead.
Place the antenna where reception is best. Power consumption in standby mode: 0.2 W
(approximate)
0.2 W (approximate)
Do not use an AC mains lead from other equipment.
Tape
2 Connect the AM loop antenna.
Note:
• Some settings return to default when you disconnect the
system.
• These speakers do not have magnetic shielding. Do
not put them near TVs, PCs or other equipment easily
influenced by magnetism.
• You cannot remove the net of the speakers.
Click!
H Set the sleep timer
P Q R
Decrease the brightness of the display panel
I
• Press the button again to cancel.
J Adjust the volume of the system
K Mute the sound of the system
• Press the button again to cancel.
• "MUTE" is also cancelled when you adjust the volume
or when you switch off the system.
L View the play menu
View the radio options
M USB port ( )
S N Headphones jack ( )
• Plug type: Ø 3.5 mm stereo (not supplied)
• Avoid listening for prolonged periods of time to prevent
hearing damage.
• Excessive sound pressure from earphones and
headphones can cause hearing loss.
• Listening at full volume for long periods may damage
the user's ears.
vice versa. In standby mode, the unit is still consuming
O Open or close the sliding door
a small amount of power.
Sliding door
P
Q Remote control sensor
• Maximum range: 7 m directly in front
R Display panel
Open or close the dock for iPod/iPhone
S
Preparing the remote control
Before using
Insulation sheet
Replacing the battery
Replace with a new battery (CR2025 lithium battery).
1
While pressing the stopper, pull out the battery
holder.
2 Insert a new battery with the (+) side facing up.
3
Push the battery holder back fully.
CR2025
To household mains socket