Canon PowerShot S100 Getting Started page 33

• If CameraWindow does not appear even after following Step 2 for
Windows, click the [Start] menu and choose [All Programs], followed by
[Canon Utilities], [CameraWindow] and [CameraWindow].
• If CameraWindow does not appear even after following Step 2 for
Macintosh, click the CameraWindow icon on the Dock (the bar which
appears at the bottom of the desktop).
• For Windows 7, use the following steps to display CameraWindow.
Click on the task bar.
In the screen that appears, click the
Choose [Downloads Images From Canon Camera using Canon
CameraWindow] and click [OK].
Double click
• You can transfer images even without using the image transfer function
in the included software by simply connecting your camera to a computer.
There are, however, the following limitations.
- It may take a few minutes from when you connect the camera to the computer
until you can transfer images.
- Images shot in the vertical orientation may be transferred in the horizontal
orientation.
- RAW images, or JPEG images recorded at the same time as RAW images,
may not transfer.
- Protection settings for images may be lost when transferred to a computer.
- There may be problems transferring images or image information correctly
depending on the version of the operating system in use, the file size, or the
software in use.
- GPS log files (see Camera User Guide) may not transfer correctly.
- Some functions in the included software may not be available, such as editing
movies, and transferring images to the camera.
• Hereby, Canon Inc., declares that this SPG-DF610 is
in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
• Please contact the following address for the original Declaration
of Conformity:
CANON EUROPA N.V.
Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
Transferring Images to a Computer for Viewing
When image transfer is complete, close
CameraWindow and press the 1 button
to turn the camera off, then unplug the
cable.
For details on how to view images using a
computer, refer to the Software Guide.
.
link to modify the program.
31