Wi-Fi Connecting - Genius Life Shot FHD300 User Manual

3.2 Wi-Fi connecting

1. Press the Power button to switch on the Device.
2. Press the Wi-Fi button to activate the device's wireless
broadcast.
3. Using your mobile device's Wi-Fi, connect to the cameras
wireless broadcast signal by searching for the unique SSID
from the list, e.g. LifeShotFHD300XXXXXX (if the last 2 digits
are the same as the last 2 digits of your password, your device
corresponds).
4. Connect to the Wi-Fi and input the Wi-Fi password
5. The Wi-Fi password will be displayed on the LCM screen. Enter
the 4 numeral/letter shown from your LCM display twice. e.g. if
LCM display shows "1234", the Wi-Fi password will be
"12341234".
6. For iOS / Android Users:
Using the mobile device [Settings] → [Wi-Fi] → [Select device
ID no.: LifeShotFHD300XXXXXX] → [Enter the password] →
[Connecting].
7. Open the LIFE Shot App
through your mobile device. The LCM display will show
, indicating the connection has been established.
Note:
1. Make sure the Wi-Fi function of the equipment is activated and the
mobile device is receiving Wi-Fi signal before executing the LIFE
Shot App, or the App will be exited.
2. The Wi-Fi connection has a maximum range of 10m from the
equipment without any obstructions in between the devices.
3. When there is no Wi-Fi activity on the camera for 3 minutes, the
Wi-Fi function will automatically disable and you will need to
re-enable the Wi-Fi signal on the camera.
4. We suggest that you should set the correct date and time for your
mobile device before using the equipment, so that the recorded
32
to begin using the camera