Button Operation - Genius Life Shot FHD300 User Manual

1.5 Button operation

You can operate the camera alone without connecting to a mobile
device via Wi-Fi/App. See the table below for a description of each
button's function.
Item
Mode button
Record button
Wi-Fi button
Power button
Note:
If you want the recorder to go back to the Default Setting, make sure
the camera's Wi-Fi is turned off. Press and hold the Mode button, then
press the Wi-Fi button. When two (2) beep tones are prompt, this
indicates factory default setting is complete.
16
Changing Modes (Timelapse / Capture /
Recording Mode)
• • • • In Timelapse mode, press the Record
button to start recording a video. Press it
again to stop recording (When the device
enters Power Saving Mode and is in
shutdown status, press the Power button to
stop recording).
• • • • In Camera mode, press the Record button
to capture a photo.
• • • • In Video mode, press the Record button to
start recording a video. Press it again to stop
recording.
Press to turn the Wi-Fi on or off.
• • • • Press to turn the camera on or off.
• • • • To reset, press and hold the Power button
for at least 5 seconds.
Function