Operation; Before Startup; Description Of The Appliance - Kärcher K 3.600 Manual

Operation

Description of the Appliance

These operating instructions describe the
maximum equipment. Depending on the
model, there are differences in the scopes
of delivery (see packaging).
Illustrations on fold-out page!
1 Coupling element for water
connection
2 Quick coupling for high pressure hose
3 Storage for trigger gun
4 Water connection with integrated sieve
5 Appliance switch "0/OFF"/ „I/ON"
6 Dosage regulator for detergent
7 Storage for trigger gun
8 Transport handle, detachable
9 Storage for high pressure hose
10 Storage of Plug 'n' Clean detergent bot-
tle with detergent connection
11 Storage for accessories
12 Storage hook for mains connection ca-
ble*
13 Plug 'n' Clean detergent bottle with
locking lid
14 Mains cable with mains plug
15 Wheels
16 Trigger gun
17 Lock trigger gun
18 Key to detach the high pressure hose
from the trigger gun
19 High pressure hose
20 Spray lance with pressure regulation
(Vario Power)
21 Spray lance with Dirtblaster
22 Washing brush*
23 Rotary washing brush*
24 Delta-Racer D150*
* depending on model
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.
18

Before Startup

Mount loose parts delivered with appliance
prior to start-up.
Install wheels
Illustration
 Push the wheels into the intake and se-
cure with the enclosed plugs, watch for
positioning of plug.
Install the storage for trigger gun
Illustration
 Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
 Insert the top holder and push down all
the way.
Install the storage hook for the mains
connection cable
Illustration
 Press in the storage hook and lock it
into the top position.
Install the transport handle
Illustration
 Place the transport handle into the in-
take until you feel resistance. Use the
heel of your hand or a soft rubber mallet
to position it.
Install the dosage regulator for
detergent
You will need the 2 included screws as well
as a Phillips screwdriver PH 2.
Illustration
 Insert both detergent hoses onto the
hose fittings.
 Install the dosage regulator and con-
nect using 2 screws.
Note: During installation you must
make sure that the tongues of the dos-
age regulator match up with the intend-
ed recesses in the casing.
Connect the high pressure hose to the
trigger gun
Illustration
 Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nipple
is aligned correctly.
 Check the secure connection by pulling
on the high pressure hose.
– 8
EN