Hints And Tips; Care And Cleaning - IKEA HOGKLASSIG Manual

ENGLISH
comes on. If you do not place the cookware
on the cooking area
2 minutes the flexible induction cooking
area is set to .
Deactivating the function

Hints and tips

Noises during operation
When a cooking zone is active, it
may hum briefly. This is a
characteristic of all ceramic glass
cooking zones and does not
impair either the function or the
life of the appliance.
Cookware for induction cooking zones
Use the induction cooking zones
with correct cookware.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, the bottom made of multi-
layer (with correct mark from a
manufacturer).
• not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is correct for an induction hob
if ...
• ... some water boils very quickly on a
zone set to the highest power setting...

Care and cleaning

General information
Warning! Deactivate the
appliance and let it cool down
before you clean it.
comes on and after
To deactivate the function touch
the power setting to
above the symbol
• ... a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware must
be as thick and flat as possible.
Cookware sizes
Induction cooking zones adapt
automatically to the size of the bottom of
the cookware. But, it must have a minimum
diameter depending on the size of the
cooking zone.
Cooking zone
Middle rear cooking
zone
Right front cooking
zone
Flexible induction
cooking area
Warning! For safety reasons, do
not clean the appliance with
steam blasters or high-pressure
cleaners.
or set
. The indicator
goes off.
Cookware diame-
ter [mm]
125 - 210
145 - 180
minimum 100
16