Setting Up Your Zotac Zbox - Zotac ZBOX User Manual

ZOTAC ZBOX

Setting up your ZOTAC ZBOX

You need to connect peripherals before using your ZOTAC ZBOX.
1
2
3
1. Connecting a WiFi antenna module
Connect a WiFi antenna module to the WiFi antenna connector.
2. Connecting a DisplayPort display
Connect the DisplayPort connector to the DP port.
3. Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel and
the other End to a hub or switch.
4. Connecting an optical S/PDIF output
Connect a digital audio device via optical S/PDIF output.
5. Connecting a VGA display
Connect the VGA connector to the VGA port.
12
4
5
6
7
8