Table of Contents
Advertisement
Listening to a cassette tape (TAPE 1 or TAPE 2)
Before playback:
! For playback, use normal or low-noise tapes for
! Do not use C-120 tapes or poor-quality tapes, as
! Before loading a tape into the cassette compartment,
Playback is possible in the TAPE 1 compartment as well as the
TAPE 2 compartment.
1
2
Downloaded From Disc-Player.com Sharp Manuals
the best sound. (Metal or CrO tapes are not rec-
ommended.)
they may cause malfunctions.
tighten the slack with a pen or a pencil.
Press the ON/STAND-BY button to turn the power on.
Open the cassette door by pushing the area marked "PUSH
EJECT ".
3
Load a cassette into the TAPE 1
compartment or TAPE 2 compart-
ment with the side to be played
facing toward you.
4
Press the TAPE (1
2) button to select the cassette you
want to listen to.
5
Press the
/
button to start playback.
To stop playback:
Press the
button.
Fast forward/rewind: (TAPE 2 only)
1 Press the
button, then press the TAPE (1
TAPE 2.
2 To advance the tape, press the
button. To rewind it, press
the
button.
Caution:
! To remove the cassette, press the
button, and then open the
compartment.
! Before changing from one tape operation to another, press the
button.
! If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not
open. In this case, wait until the power is restored.
! Even if the
button on the remote control is pressed during tape
playback, the unit will not enter the pause mode.
03/2/17
CD-E250E(E)3.fm
CD-E250E
TAPE 1
TAPE 2
2) button to select
21
Advertisement
Table of Contents
