Set-Up - Cub Cadet RZT-S Zero Operator's Manual

Set-Up

Contents of Crate
• One Rider
• One Rider Operator's Manual
Rider Preparation
Steering Wheel Column
Place the steering column in one of the two desired positions (high
or low) and secure in place with the hex screws and flat washers.
See Figure 3-1.
Flat Washer
High
Figure 3-1
• One Battery Charger
• One Battery Charger Manual
Hex Screw
Low
• One Deck Wash Hose Coupler
Adjusting the Seat
To adjust the position of the seat, lift the seat adjustment lever
up. Slide the seat forward or rearward to the desired position;
then release the adjustment lever. Make sure seat is locked into
position before operating the rider. See Figure 3-2.
Figure 3-2
NOTE: In order to have the seat tilted up, the seat must be
positioned all the way to the rear. Caution should be used to
avoid damage to the battery cover when tilting the seat forward.
3
9