Samsung Xpress C41x series User Manual page 102

Installing driver over the network
Command-line Parameters
Following table shows commands that can be used in the command window.
Following command-line are effective and operated when command is
used with /s or /S. But /h, /H or /? are exceptional commands that can be
operated solely.
Command- line Definition
/s or Starts silent installation.
/S
/p"<port name>" or Specifies printer port.
/P"<port name>"
Network Port will
be created by use
of Standard TCP/
IP Port monitor.
For local port, this
port must exist on
system before
being specified
by command.
Description
Installs machine drivers
without prompting any UIs
or user intervention.
Printer port name can be
specified as IP address,
hostname, USB local port
name or IEEE1284 port
name.
For example
• /p"xxx.xxx.xxx.xxx" in
where, "xxx.xxx.xxx.xxx"
means IP address for
network printer. /
p"USB001", /P"LPT1:", /
p"hostname"
Command- line Definition
/a"<dest_path>" or Specifies destination path
for installation.
/A"<dest_path>"
The destination
path should be a
fully qualified
path.
/n"<Printer name>" Specifies printer name.
or Printer instance shall be
created as specified
/N"<Printer name>"
printer name.
/nd or Commands not to set the
installed driver as a
/ND
default machine driver.
Description
Since machine drivers
should be installed on the OS
specific location, this
command applies to only
application software.
With this parameter, you can
add printer instances as you
wish.
It indicates installed machine
driver will not be the default
machine driver on your
system if there are one or
more printer drivers
installed. If there is no
installed machine driver on
your system, then this option
won't be applied because
Windows OS will set installed
printer driver as a default
machine driver.
2. Using a network-connected machine
102