Kenwood JMP60 Instructions Manual page 9

Hide thumbs Also See for JMP60:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
filter
To assist with removal of pulp and fibres, place
l
the anti-drip stopper in the closed position. Switch
the juicer on and pour approximately 300mls
water down the feed tube. Operate the juicer for
approximately 20 seconds, place the juice jug
under the juice spout and open the stopper to allow
the water to flow out.
Always clean the filter basket immediately after
l
juicing.
Use the brush supplied to clean the filter. For best
l
results, rinse under water and brush until clear.
wiper holder
The wipers in the filter holder can be removed for
l
(L)
cleaning
. To assemble, Insert the upper/lower
wipers into the gap of the filter holder and secure
(M)
. Ensure that the wipers are replaced and fitted
correctly before assembling the juicer.
The dishwasher safe parts can be washed on the
top rack of your dishwasher.
Item
Food pusher
Lid
Filter
Scroll
Juicing bowl
Wiper holder
Juice jug
Pulp collector
Juice jug sieve
Sorbet attachment
Suitable for
dishwashing
service & customer care
If the cord is damaged it must, for safety reasons,
l
be replaced by KENWOOD or an authorised
KENWOOD repairer.
If you experience any problems with the operation
l
of your appliance, before requesting assistance
refer to the "troubleshooting guide" section in the
manual or visit www.kenwoodworld.com.
Please note that your product is covered by a
l
warranty, which complies with all legal provisions
concerning any existing warranty and consumer
rights in the country where the product was
purchased.
If your Kenwood product malfunctions or you
l
find any defects, please send it or bring it to an
authorised KENWOOD Service Centre. To find up to
date details of your nearest authorised KENWOOD
Service centre visit www.kenwoodworld.com or the
website specific to your Country.
Designed and engineered by Kenwood in the UK.
l
Made in China.
l
IMPORTANT INFORMATION FOR
CORRECT DISPOSAL OF THE PRODUCT
IN ACCORDANCE WITH THE EUROPEAN
DIRECTIVE ON WASTE ELECTRICAL AND
ELECTRONIC EQUIPMENT (WEEE)
At the end of its working life, the product must not be
disposed of as urban waste.
It must be taken to a special local authority
differentiated waste collection centre or to a dealer
providing this service.
Disposing of a household appliance separately avoids
possible negative consequences for the environment
and health deriving from inappropriate disposal and
enables the constituent materials to be recovered to
obtain significant savings in energy and resources.
As a reminder of the need to dispose of household
appliances separately, the product is marked with a
crossed-out wheeled dustbin.
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents