Telnet Command: Bpa - Draytek Vigor2925 Series User Manual

For users using previous Windows system (e.g., 2000/XP), simply click Start >> Run and
type Telnet 192.168.1.1 in the Open box as below. Next, type admin/admin for
Account/Password. And, type ? to get a list of valid/common commands
T e l n e t C o m m a n d
T e l n e t C o m m a n d
This command allows to configure a network setting specified for Australia's ISP.
bpa m [-<command> <parameter> | ... ]
S y n t a x D e
S y n t a x D e
Parameter
m
-a <enable>
-n <UserName>
-p <PassWord>
-s <select>
: b p a
: b p a
s c r i p t i o n
s c r i p t i o n
Description
Available settings are 1 and 2.
1/0 to enable/disable this entry
contact UserName(max. 24 characters)
contact PassWord (max. 24 characters)
It means to specify an IP address for Server.
0 : no selection.
1 : NSW(61.9.192.13)
2 : QLD(61.9.208.13),
3 : VIC(61.9.128.13)
4 : SA(61.9.224.13),
5 : WA(61.9.240.13)
527
Vigor2925 Series User's Guide