Applying The Grease - Canon iPF760 series Service Manual

4.4 Applying the Grease

4.4.1 Applying the Grease

iPF765 / iPF760 / iPF750 / iPF755
Some parts require application of grease when replaced. Apply the grease(special tool) listed below.
Smear the grease lightly and evenly with a flat brush or the like.
For the printer disassembly/reassembly method, refer to "DISASSEMBLY/REASSEMBLY" and "parts catalog".
Do not apply the grease to locations in which not designated grease may cause poor print quality. Take particular care that grease do not get onto the wiper, cap,
carriage shaft and the linear scale.
No.
1 Joint Base Rib
2 Shaft Cleaner
3 Upper Cover Hinge Catch
Roll Cover Slide Guide
4 Contact between Pinch Roller Release Shaft and
Pinch Roller
Pinch Roller Pressure Release Gear
Protrusion of Release Lever
Bushing of Feed Roller
1. Joint Base Rib [1]
Location
FLOIL G-5000H
EU-1
EU-1
EU-1
FLOIL G-5000H
FLOIL G-5000H
FLOIL G-5000H
FLOIL G-5000H
Grease Quantity
Approx. 8-20mg
Soaks enough.
Approx. 8-20mg
Approx. 8-20mg
Approx. 8-20mg
Approx. 8-20mg
Approx. 8-20mg
Approx. 8-20mg
[1]
F-4-118
Remarks
Be careful not to apply the grease to
the edge face of protrusions.
Chapter 4
0023-2642
4-57