Cadillac 2017 XT5 Owner's Manual page 212

Hide thumbs Also See for 2017 XT5:
Table of Contents

Advertisement

The speedometer reading can be
displayed in either English or metric
units. See Instrument Cluster
(Uplevel Cluster) 0 119 or
Instrument Cluster (Base Cluster)
0 117. The increment value used
depends on the units displayed.
Reducing Speed While Using
Cruise Control
If the cruise control system is
already activated:
Press and hold SET until the
desired lower speed is reached,
then release it.
To decrease the vehicle speed in
small increments, briefly press
SET to the first detent. For
each press, the vehicle goes
about 1 km/h (1 mph) slower.
To decrease the vehicle speed in
larger increments, briefly press
SET to the second detent. For
each press, the vehicle speed
decreases to the next 5 km/h
(5 mph) mark on the
speedometer.
The cruise control system may
automatically brake to slow the
vehicle down.
The speedometer reading can be
displayed in either English or metric
units. See Instrument Cluster
(Uplevel Cluster) 0 119 or
Instrument Cluster (Base Cluster)
0 117. The increment value used
depends on the units displayed.
Passing Another Vehicle While
Using Cruise Control
Use the accelerator pedal to
increase the vehicle speed. When
you take your foot off the pedal, the
vehicle will slow down to the
previous set cruise speed.
While pressing the accelerator pedal
or shortly following the release to
override cruise, briefly applying SET
will result in cruise set to the
current vehicle speed.
Using Cruise Control on Hills
How well the cruise control will work
on hills depends upon the vehicle
speed, load, and the steepness of
the hills. When going up steep hills,
you might have to step on the
Driving and Operating
accelerator pedal to maintain your
speed. When going downhill, the
cruise control system may
automatically brake to slow the
vehicle down. Also, you may have
to brake or shift to a lower gear to
keep your speed down. If the brake
pedal is applied, cruise control
disengages.
Ending Cruise Control
There are four ways to end cruise
control:
Step lightly on the brake pedal.
Press
.
Shift the transmission to
N (Neutral).
Press
.
Erasing Speed Memory
The cruise control set speed is
erased from memory if
pressed or if the ignition is
turned off.
211
is

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents