Cadillac 2017 XT5 Owner's Manual page 208

Hide thumbs Also See for 2017 XT5:
Table of Contents

Advertisement

See If the Vehicle Is Stuck 0 186
and Turning the Systems Off and
On later in this section.
The indicator light for both systems
is in the instrument cluster. This
light will:
Flash when TCS is limiting
wheel spin.
Flash when StabiliTrak is
activated.
Turn on and stay on when either
system is not working.
If either system fails to turn on or to
activate, a message displays in the
Driver Information Center (DIC),
and
comes on and stays on to
indicate that the system is inactive
and is not assisting the driver in
maintaining control. The vehicle is
safe to drive, but driving should be
adjusted accordingly.
If
comes on and stays on:
1. Stop the vehicle.
2. Turn the engine off and wait
15 seconds.
3. Start the engine.
Drive the vehicle. If
comes on
and stays on, the vehicle may need
more time to diagnose the problem.
If the condition persists, see your
dealer.
Turning the Systems Off
and On
Driving and Operating
Caution
Do not repeatedly brake or
accelerate heavily when TCS is
off. The vehicle driveline could be
damaged.
To turn off only TCS, press and
release
. The Traction Off light
displays in the instrument cluster
and the appropriate DIC message is
displayed. See Ride Control System
Messages 0 147. To turn TCS on
again, press and release
Traction Off light
displayed in the
instrument cluster will turn off and
the appropriate DIC message is
displayed.
If TCS is limiting wheel spin
when
is pressed, the system will
not turn off until the wheels stop
spinning.
To turn off both TCS and StabiliTrak,
press and hold
until the Traction
Off light
and StabiliTrak Off
light
come on and stay on in the
207
. The

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents