Dvd Playback; Connecting A Decoder; Connecting A Dvd Player - Pioneer PDP-LX6090 Operating Instructions Manual

12 Using with other equipment
Chapter 12
Using with other equipment
You can connect many types of external equipment to your flat
screen TV, like a decoder, VCR, DVD player, game console, personal
computer and camcorder.
To view images coming from external equipment, select the input
source using INPUT 1 to INPUT 5 or PC on the remote control
(page 14) or INPUT on the flat screen TV.
Caution
• To protect all equipment, always unplug the flat screen TV from
the power outlet before connecting to a decoder, VCR, DVD
player, game console, personal computer, camcorder or other
external equipment.
Note
• Refer to the relevant operation manual (DVD player, etc.)
carefully before making connections.
• Unless stated otherwise, the connecting cables shown in the
illustrations are readily available commercially, but are not
supplied with this product.

Connecting a DVD player

Use the INPUT 2 terminal when connecting to a DVD player and
other audiovisual equipment.
When using a component video cable, select "COMPONENT" in the
"Input Select" menu and "SCART" in the "Audio Select" menu (see
Selecting an input signal type on page 52). In this case, the SCART
cable will carry the audio signal.
If you want the audio cable to carry the audio signal, connect the
audio cable to the INPUT 2 terminal (Audio) and select "RCA" in the
"Audio Select" menu.
Rear view
SCART cable
DVD player
58
Downloaded From TV-Manual.com Manuals
En
T T
W W
Stereo audio cable
Component
video cable

DVD playback

To watch a DVD, press INPUT 2 on the remote control unit or press
INPUT on the flat screen TV to select "INPUT 2".
Note
• If DVD images do not come in clearly, you may need to change
the input signal type setting using the menu. See page 52.
• Refer to your DVD player operation manual for the signal type.

Connecting a decoder

Use the INPUT 1 terminal when connecting a decoder and other
audiovisual equipment.
T
W
Rear view
Decoder
Displaying a decoder image
Press buttons 0 to 9 or P+/P– to select a programme specified for
decoder setting (page 28).
Press INPUT 1 on the remote control unit or press INPUT on the flat
screen TV to select "INPUT 1".
Note
• Be sure to use "INPUT 1" to connect a decoder.
• If decoder images do not come in clearly, you may need to
change the input signal type setting using the menu. See
page 52.
• Refer to your decoder operation manual for the signal type.
T
W
SCART cable