Setting Up - Pioneer PDP-LX6090 Operating Instructions Manual

Setting up

Chapter 8
Setting up
Setting up TV channels
This section describes how to automatically search for and set up
TV channels.
Using Auto Installation
When the flat screen TV is switched on for the first time after
purchase, the initial auto installation is initiated. You can
automatically set language, country and channels in successive
operations.
1 Select "Language" (/).
2 Select a language (/).
Auto Installation
Language
Country
Tuner Type
Aerial Power
Installation
You can select from among 19 languages; English, German, French,
Italian, Spanish, Dutch, Swedish, Portuguese, Greek, Finnish,
Russian, Turkish, Norwegian, Danish, Czech, Polish, Ukrainian,
Hungarian, and Croatian.
3 Select "Country" (/).
4 Select the country (/).
5 Select "Tuner Type" (/).
6 Select a tuner type (/).
You can select among three options; "All", "Digital", and
"Analogue".
7 Select "Aerial Power" (/).
Only selectable when "Digital" or "All" is selected for "Tuner Type" in
step 5. If not go to step 9.
Caution
• When the "Aerial Power" setting is on, directly connect the
aerial to the ANT input terminal at the rear of the flat screen TV.
Connecting any device between the aerial and flat screen TV
may cause damage to the device.
8 Select "On" or "Off" (default)(/).
9 Select "Start" (/ then ENTER).
Auto Installation automatically starts.
To quit Auto Installation in progress, press RETURN.
Downloaded From TV-Manual.com Manuals
Setting up analogue TV channels
manually
English
Use the Manual Adjust function to set up analogue TV channels
manually.
Austria
1
All
Off
2
3
The password entry screen appears. Enter your four-digit password
using buttons 0 to 9. For the password, see Using a password on
page 56.
Start
4
5
6
You can select 1 through 99.
7
8
You can also press / to enter a frequency.
9
10 Select a sound system (/).
You can select from among "B/G", "D/K", "I", "L", and " L' ".
Note
• You can start Auto Installation from the HOME MENU after
moving to another country, for example. Perform the following
steps before starting Auto Installation: Press HOME MENU,
select "Setup" (/ then ENTER), then "Auto Installation" (/
 then ENTER). The password entry screen appears. Enter your
four-digit password using buttons 0 to 9. For the password, see
Using a password on page 56.
• If no channel is found, check the antenna connections, and
then retry Auto Installation.
Press HOME MENU.
Select "Setup" (/ then ENTER).
Select "Analogue TV Setup" (/ then ENTER).
Select "Manual Adjust" (/ then ENTER).
Select "Programme Entry" (/).
Select a programme number (/).
Manual Adjust
Programme Entry
Search
System
Colour System
Store
Tuner NR
Channel Lock
Decoder
Select "Search" (/).
Enter a frequency using buttons 0 to 9, then ENTER.
Select "System" (/).
08
1
42.75MHz
B/G
Auto
Yes
On
View
Off
27
En