Dell G2210 User Manual page 34

Safety Related Issues
Intermittent Problems
Missing Color
Wrong Color
Image retention from a static
image left on the monitor for a
long period of time
Downloaded from ManualMonitor.com Manuals
scrambled Perform Auto Adjust using the OSD.
l
or appears Adjust Phase and Pixel Clock controls using the OSD.
l
torn Perform monitor self-test feature check to determine if scrambled screen appears in self-test mode.
l
Check for bent or broken pins in the video cable connector.
l
Restart the computer in the safe mode.
l
Visible signs Do not perform any troubleshooting steps.
l
of smoke or Contact Dell immediately.
l
sparks
Monitor Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
l
malfunctions Reset the monitor to Factory Settings.
l
on & off Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode.
l
Picture does Perform monitor self-test feature check.
l
not have Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
l
color Check for bent or broken pins in the video cable connector.
l
Picture color Change the Color Setting Mode in the Color Settings OSD to Graphics or Video depending to the
l
is not good application.
Try different Color Preset Settings in Color Settings OSD. Adjust R/G/B value in Color Settings OSD if the
l
Color Management is turned off.
Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD.
l
Run the built-in diagnostics.
l
Faint Use the Power Management feature to turn off the monitor at all times when it is not in use (for more
l
shadow information, see Power Management Modes).
from the Alternatively, use a dynamically changing screensaver.
l
static image
displayed
appears on
the screen