Exposure Correction - Sanyo VPC-E6EX Xacti Instruction Manual

EXPOSURE CORRECTION

When capturing images, you can make the image lighter or darker.
1
Point the camera lens at the
subject.
h If the Mode Select Screen or a
menu screen (Shooting Setting
Screen) is active, press the MENU
button to exit it.
2
With the Shooting Setting Screen
not shown, toggle the SET button to
the right.
h The exposure correction bar
appears.
3
Toggle the SET button to the left or
right to adjust the exposure.
h The exposure setting numerical
value is shown at the left end of the
exposure bar. The exposure can be
set to a value from –1.8EV to
+1.8EV.
h To cancel the exposure correction
bar, press the MENU button.
h The exposure correction setting
can also be accessed from the
Shooting Setting Screen (page 58).
HINT
The exposure correction setting is canceled in the following cases:
i When the pointer is set to the center position.
i When the Option Screen is accessed.
i Press the playback button [H].
i After the power is turned off.
Downloaded From camera-usermanual.com Sanyo Manuals
45
English
MENU button
SET button
Pointer
Exposure correction bar