Component Identifi Cation - Kärcher HD 3.0/27 G Operator's Manual

ENGINE
Detergent
Detergent
Starter Grip
Injector
Pump — Develops high pressure.
Starter Grip — Used for starting the engine manu-
ally.
Spray Gun — Controls the application of water and
detergent onto cleaning surface with trigger device.
Includes safety latch.
Unloader valve — Safety device which allows pres-
sure tu be released when spray gun is closed
Detergent Injector — Allows you to siphon and mix
detergents. (Not included with machine)
Wand — Must be connected to the spray gun.
COMPONENT IDENTIFICATION
Pressure
Nozzle
Hose
• 9.801-759.0 • Rev. 11/15
Straight
Through Wand
Spray Gun
Trigger
Inlet
Screen
Unloader
Pump
protector
Pump
High Pressure Hose — Connect one end to water
pump discharge nipple and the other end to spray
gun.
Pump Protector — Cycles fresh cool water through
pump when recirculating water reaches 140°F.
Note: If trigger on spray gun is released for more
than 1-2 minutes, water will leak from valve. Warm
water will discharge from pump protector onto
fl oor. This system prevents internal pump dam-
age.
Detergent
Bucket
(not included)
High Pressure
Hose
Garden Hose
(not included)
Pump
7