Introduction - Honeywell GKP-S8M User Manual

Introduction

This manual describes how to use your wireless keypad.
The keypad is used to arm and disarm your security
system using a valid access code or a key TAG.
The keypad is equipped with a proximity tag reader,
located next to the
integrated siren as a deterrent and 4 LEDs to inform you on
system status.
System armed
LED (LED 1)
Intruder alarm (*)
(LED 2)
Total set
arming key
Tag reader area
(*) If keypad installed with CMI, HMI, Sucre Box panels. Refer to Annex A if keypad
installed with PMI panels.
symbol; the keypad also features an
Siren output
KEYPAD
TAG
System fault (*)
(LED 3)
Tamper alarm (*)
(LED 4)
S.O.S keys
Partial set
arming key
3