Convenience And Safety Features - CrimeStopper PS01-G5 Operating Instructions Manual

CONVENIENCE AND SAFETY FEATURES

KEYLESS ENTRY (Power Door Locks, may require Data Module - Optional)
This system enables you to remotely lock and unlock the vehicle's doors (if equipped with power locks) via remote
control for safety and convenience. Note: This feature may require extra labor and/or parts to install. Press the
Lock or Unlock transmitter button as you leave or come near the vehicle. Parking lights will flash once for Lock and
twice for Unlock. The parking lights will turn on for 30 seconds with Unlock to assist in locating and providing
illumination near your vehicle when approaching at night for safety. The parking light also turns off with ignition on. If
vehicle is running by the remote start system, the lights will flash, but return back to solid.
AUTO LOCK / UNLOCK (Option # 2)
The Auto Lock feature controls whether the doors will automatically lock/unlock on your vehicle when driving or with
turning the Ignition ON/OFF. If the Auto Lock feature is turned on, and your system is in "Tach" mode, then the
doors should automatically lock as the engine RPM's increase (driving). If the Auto Lock feature is turned on, and
your system is in "Smart Tachless" mode, then the doors will lock a few seconds after the Ignition is turned on.
When the Auto Lock feature is turned on, the system will always unlock the doors when the Ignition is turned off.
With this feature turned OFF, the system will not automatically lock or unlock the vehicle. See your installer for
programming information on this feature.
HORN CHIRPS (Option # 7, 13 & 16)
If vehicle horns are connected to the system, they will provide audible confirmation chirps for lock and unlock and
remote start. The chirp sound can be programmed from short to long to adjust for different sounding horns. Pressing
the Lock or Unlock button (Programmable option for 1 or 2 Press) will provide a horn chirp for audible confirmation.
The system can also be programmed to provide 3 chirps when a remote start is requested using the remote. Note:
Horn honk/chirp feature may require extra labor and/or parts to install.
Option 7 = Chirps with Remote Start On/Off.
Option 13 = 1 or 2 button press for Chirp with Lock / Unlock.
Option 16 = Short, medium or long Chirp Pulse (15, 20 or 40 milliseconds).
OEM ALARM INTERFACE (May require optional Databus Module)
This feature is designed to Disarm and Re-arm Factory equipped security systems in conjunction with remote start
and keyless entry (if needed for your vehicle). This feature will maintain the original integrity and security of your
vehicle's factory equipped systems before, during, or after remote start. Some vehicles require an optional Databus
module to operate a factory alarm or keyless entry.
14