Sony EVI-HD7V Operating Instructions Manual page 73

When you set DISPLAY INFO to ON
on the SYSTEM menu, the message
"PRESET n : OK" automatically
appears for about 3 seconds on the
monitor screen.
Recalling the stored settings
Press any of the POSITION buttons, 1 to 6,
in which you have stored the settings.
When you set DISPLAY INFO to ON on the
SYSTEM menu, the message "RECALL n :
OK" automatically appears for about 3
seconds on the monitor screen.
Cancelling the preset memory
While holding down the RESET button,
press the POSITION button from which you
want to cancel the settings.
When you set DISPLAY INFO to ON on the
SYSTEM menu, the message "RESET n :
OK" automatically appears for about 3
seconds on the monitor screen.
Notes
• When the power is turned on, the camera
starts with the settings stored in
POSITION 1.
• If you want to retain the previous pan and
tilt positions, etc. before the power is
turned off and turned on again, store those
positions in POSITION 1.
Press a POSITION
button.
While holding
down this button
Press a
POSITION button.
While holding
down this button
Storing the Camera Settings in Memory — the Presetting Feature
• Storing or cancelling the settings in
POSITION 1 takes about 2 seconds longer
than those of other positions.
• When you are storing or cancelling the
settings in one POSITION, you cannot call
up, store or cancel the settings in another
POSITION.
• When the menu is displayed on the screen,
you cannot perform the operation for
storing, recalling, or cancelling the setting.
Be sure to return to the normal display
before starting these operations.
73