Timer Recording - Topfield TF 5000 PVRt Masterpiece User Manual

7.1.2 Timer recording

To additionally record another service, switch to the service
you want to record, and press the
Once a recording is started, it is put on the recorded programme
list even though it is not finished yet. The recording file is
named after its service name with a suffix of a number. To
view the recorded programme list, press the
alternatively select the File List menu. See §
description about the recorded programme list.
You can set a service to be recorded at a specific time. Even
if the digital receiver is in standby mode, it will switch into
operation mode and start recording at the specified time. When
the recording comes to the end, the digital receiver will switch
back into standby mode again in one minute. However, if
you press any button on the remote control or on the front
panel even just one time, the digital receiver will not switch
into standby mode.
7.1 Recording a programme 45
To stop recording, press the
button; then a box like
the left figure appears, which
shows programmes currently be-
ing recorded. If you select one,
its recording will stop.
While a recording is going on,
you can watch or record another
service.
button.
7.2
button or
for detailed