Correcting Keystone - ViewSonic PJD5126 User Manual

Fine-tuning the image clarity
1.
Adjust the projected image to the size
that you need using the zoom ring.

Correcting keystone

Keystoning refers to the situation where the projected image is noticeably wider at either the
top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, besides adjusting the height of the projector, you will need to manually
correct it following one of these steps.
• Using the remote control
Press
display the Keystone correction page. Press
correct keystoning at the top of the image. Press
to correct keystoning at the bottom of the image.
• Using the OSD menu
1. Press MENU/EXIT on the projector or
Menu on the remote control and then press
highlighted.
2. Press
MODE/ENTER on the projector or Enter
on the remote control. The Keystone
correction page is displayed.
3. Press
the image or press
the bottom of the image.
Downloaded From projector-manual.com Viewsonic Manuals
/ on the projector or remote control to
DISPLAY
/ until the
to highlight Keystone and press
to correct keystoning at the top of
to correct keystoning at
2. If necessary, Sharpen the image by
rotating the focus ring.
to
menu is
Press
29
ZOOM
MENU
EXIT
M E N U
EXIT
/ .
/
Press
.