Removing & Installing Body Components; Seat - Honda CBR540F Owner's Manual

14 CBR650F FA-32MJEB000.book 58 ページ ２０１３年１２月２６日 木曜日 午後３時５８分
Removing & Installing Body Components

Seat

Front prong
Rear prongs
Rear stays
Front stay
58
Honda CBR540F Owner's Manual
❙
1. Insert the ignition key into the seat lock,
2. Pull the rear of the seat back and up.
Seat
❙
1. Insert the front prong into the front stay
2. Insert the rear prongs into the rear stays
3. Push forward and down on the rear of the
Ignition
key
The seat locks automatically when closed.
Take care not to lock your key in the
Seat lock
compartment under the seat.
http://www.motorcycle.in.th
Removal
and turn and hold the key clockwise to
unlock the seat.
Installation
on the frame.
on the frame.
seat until it locks in place.
Make sure that the seat is locked securely
in position to pull it up lightly.