7. Install the operating system for your computer (see
8. Install the drivers and utilities for your computer (see
Returning a Hard Drive to Dell
Return your old hard drive to Dell in its original or comparable foam packaging. Otherwise, the hard drive may be damaged in transit.
1
foam packaging
Media Bay
NOTE:
If the device security screw is not present, you can remove and install devices while the computer is running and connected to a docking device
(docked).
Removing the Device Security Screw
If present, you must remove the device security screw before you remove the device:
1. Save and close any open files, exit any open programs, and shut down the computer.
2. If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.
3. Close the display and turn the computer upside-down.
4. Use a #1 Phillips screwdriver to remove the device security screw from the bottom of the computer.
1
device security screw
2
device latch release
Removing and Installing Media Bay Devices
NOTE:
If the device security screw is not installed, you can remove and install devices while the computer is running and connected to a docking device
(docked).
NOTICE:
To prevent damage to devices, store them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or
placing heavy objects on top of them.
Downloaded from LpManual.com Manuals
Restoring Your Operating
System).
Reinstalling Drivers and
Utilities).
2
hard drive