Taking Pictures With - Olympus Stylus 1050SW Instruction Manual

Taking pictures with

[COMBINE IN CAMERA 2]
1 Use 34 to select the direction that the
frames are combined.
Direction for
combining the
next frame
2 Press the shutter button to take the fi rst
frame.
●
A guide frame appears as a reference.
CANCEL
MENU
1st frame
3 Compose the second shot so that the
joint area overlaps the guide frame.
34 EN
CANCEL
MENU
Guide frame
Joint area
CANCEL
MENU
CANCEL SAVE OK
MENU
Composition of the 2nd frame
4 Press the shutter button to take the
second frame.
To combine only two pictures, press the
o button before taking the third frame.
5 Take the third frame in the same way as
Steps 3 to 4.
●
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To cancel making panoramic picture during
shooting, press the m button.
Taking pictures with [COMBINE IN PC]
1 Use 1234 to select the direction that
the frames are combined.
2 Press the shutter button to take the fi rst
frame, and then compose the second
shot.
●
Compose the shot using the guide frame so
that the two adjacent frames overlap.
3 Repeat Step 2 until the number of
required frames are taken, and then press
the o button when done.
When the g mark is displayed, you cannot
continue shooting any further. Panorama
shooting is possible for up to 10 frames.
Refer to the OLYMPUS Master 2 help
guide for details on how to make panorama
images.