Making Ice - Samsung RT51 series User Manual

maKing icE

making ice cubes
Remove the ice cube tray by pulling it towards you. Fill the tray with water up to
the maximum water level marked on the rear of the tray. Slide the tray back into
the holder, taking care not to spill the water. Wait until the ice cubes are formed.
Freezing time : It is recommended that you wait for about one hour with the
Twist ice maker Type
Removing the ice cubes
Make sure that the ice cube storage bin is in place under the ice cube tray.
If not, slide it into place.
Twist one of the levers firmly in the clockwise direction until the tray twists slightly.
Result : The ice cubes fall into the storage bin.
Remove the storage bin by : • Lifting it slightly
Twist ice maker Type
14_
operating
DA68-02454B(0.0).indb 14
temperature set to Power Freeze for the ice cubes to form.
ice home bar Type
Repeat Step 2 for the other half of the tray, if necessary.
• Pulling it towards you
ice home bar Type
in Door Type
in Door Type
2010.6.24 1:20:45 PM