Setting The Date And Time - Dymo letratag User Manual

Setting the Date and Time

You need to set the current date and time so that the date is correct
if you choose to automatically insert a date on your label.
To set the date and time
1. Press
2. Use the up or down arrow key to select Set Date and press
The default date is displayed.
3. Use the left or right arrow key to move the cursor over each
setting (month, day, and year) and use the up or down arrow
keys to increase or decrease the value.
4. When finished, press
5. Use the left or right arrow key to move the cursor over each
setting (hours and minutes) and use the up or down arrow keys
to increase or decrease the value.
6. When finished, press
6
.
.The default time is displayed.
.
.