Sending Images To Online Destinations - HP Photosmart R967 User Manual

Chapter 6
3.
Highlight
highlight Share Menu Setup and press
4. Connect the camera to your computer via the dock.
Follow the on-screen instructions to set up
destinations in your camera.
5. Disconnect the camera from the computer, press
the new destinations are now in the camera.

Sending images to online destinations

After you have set up online destinations in the camera, you can mark images to be sent
to these custom destinations the next time you connect your camera to your computer
via the dock.
1.
Press
2. In the Share sub-menu, highlight an option, then
press
–
–
–
3. To select additional images to share, use
2.
4. When you are done marking images to share, press
5. To send the images to the destinations you selected, verify that the computer is
connected to the Internet, then connect the camera to the computer via the dock
and turn on the camera.
44
Downloaded from ManualsCamera.com Manuals
Share, then press
, then highlight Share and press
, use and
.
Custom Destinations—Selects the destination
to send the image displayed in the
background. There may be multiple
destinations depending on the number of
them you created (see
destinations in the camera on page
can scroll to a different image using
All Favorites...—Displays the Share All Favorites sub-menu. To select this
option, press in the sub-menu, then highlight each destination to which you
want to send all Favorites, pressing
selecting destinations, highlight EXIT and press
only if you have tagged more than one image as a Favorite (see
images as Favorites on page
All Images...—Displays the Share All Images sub-menu. To select this option,
press in the sub-menu, then highlight each destination to which you want
to send all images, pressing
destinations, highlight EXIT and press
have more than one image in the camera.
. If you have already created destinations,
again.
to verify that
to highlight Share, then press
Setting up online
43). You
.
to select each destination. After
42).
to select each destination. After selecting
. This option is available only if you
to display an image, then repeat Step
.
. This option is available
Tagging
.