Reading Distances - Intermec SR61T1D User Manual

Reading Distances

SR61T Tethered Scanner User's Guide
Bar Code Symbologies for 1D Models (SR61T1D and SR61TL)
GS1 DataBar Expanded*
GS1 DataBar Limited*
* = These symbologies are only available with SR61TL (laser scanner).
The reading distances for each scanner are typical distances measured
in an office environment with extended reading activated by default
(200 lux). Extended reading range is available for scanners with
software version BF4_252 and later.
Note: Minimum distances depend on the number of characters
encoded in the bar code.
Appendix A — Specifications and Reading Distances
Telepen
TLC 39
51